GKADL-2007 | Gravitee Inline

GK-2007 Gravitee Modular Inline Exhibit -- Image 1GK-2007 Gravitee Modular Inline Exhibit -- Image 3GK-2007 Gravitee Modular Inline Exhibit -- Image 4GK-2007 Modular Inline Exhibit -- Plan ViewGK-1004 -- 10 x 10 VersionGravitee One-Step Modular System Features
GK-2007 Gravitee Modular Inline Exhibit -- Image 1GK-2007 Gravitee Modular Inline Exhibit -- Image 2GK-2007 Gravitee Modular Inline Exhibit -- Image 3GK-2007 Gravitee Modular Inline Exhibit -- Image 4GK-2007 Modular Inline Exhibit -- Plan ViewGK-1004 -- 10 x 10 VersionGravitee One-Step Modular System Features

Purchase

$31,140
No Tools. No Kidding.
  • One-Step Gravitee Modular System
  • One Perfect System. Limitless Flexibility.
  • GK-2007 Hybrid Trade Show Inline
  • See GK-1007 for the 10 x 10 Version
  • See RE-2064 for the Rental Version
  • Single/Double-sided Aluminum Frames
  • Large Format Tension Fabric or Direct Print Graphics

  • (2) Flat Gravitee Panels (14.125" W x 95" H)
  • (1) Flat Gravitee Panel (23" W x 95" H)
  • (1) Flat Gravitee Panels (28.5" W x 95" H)
  • (3) Flat Gravitee Panel (30" W x 95" H)
  • (4) Flat Gravitee Panel (38" W x 95" H)
  • (1) Gravitee Door (38" W x 95" H) with Full-size Closet and (4) Shelves
  • (6) 90 Degree Connectors
  • (1) GOD-1558 Reception Counter with Rectangle Countertop and Locking Storage
  • (1) Monitor Mount
  • (2) Adjustable LED Stem Lights

  • Includes All Tension Fabric and Direct Print Graphics Shown
  • Includes Fabric-Lined Crate with Customized Jigging and Reusable Packaging
  • Excludes Monitor and Flooring
  • Made in the USA

    Custom Modular Assembly: Panels with Slide Clip Connectors (no tools)

GK-1004, GK-2004, and GK-2007 (RE-2064) Gravitee One-Step Modular System

GK-2007 Gravitee Modular Inline Exhibit -- Image 1It's as if we read your mind. You wanted a distinctive custom design, easy to assemble (without tools), lightweight construction, and modular reconfigurability. Welcome to Gravitee!  The Gravitee One-Step System features single/double-sided panels that connect without tools or loose parts, SEG or fabric graphics, fully assembled flat or curved panels, and a wide range of accessories. The GK-1004 even comes with a full-size door and a closet. The entire display packs in a fabric-lined, fully jigged custom crate. Each component is numbered for effortless assembly.

Browse through the island and inline galleries where you'll see a wide range of options and prices. These are meant to generate ideas. There are no cookie cutter designs. We'll design the exhibit that matches your specific marketing goals and budget.

Want to see this island with your branding? No problem. Give us a call or send us an email.

Features and Benefits:

  • Gravitee One-Step Modular System
  • Custom and Custom Modular Construction
  • Single or Double-sided Panels
  • Full-size Door with Closet
  • Direct Print and Fabric Graphics
  • Re-configures to 10 x 20 Inline
  • Fabric-lined, Jigged Crates with Customized Packaging
  • Made in the USA

Wireless Charging Kit for Most Counters

$172
  • MOD-227 Wireless Charging Assembly
  • Dims: 2.625" Visible Width with 2.25" W Counter Top Insert
  • (1) Fast Charging Wireless Charging Pad
  • Great Addition to Most Counters, Workstations, and Kiosks in Gallery
  • Priced for (1) Wireless Pad
  • Excludes Counter Top and Counter
  • No Tools Required
GKADL-2007 | Gravitee Inline

Documentation for GKADL-2007 | Gravitee Inline

Frequently Asked Questions

  1. What is a hybrid exhibit?

    Hybrid is a relatively new category of trade show displays. Generally, hybrid displays incorporate aluminum extrusion, tension fabric, and other display components such as laminates, wood, Sintra, and other materials to create a tabletop, inline, or island exhibit.

    Hybrids make liberal use of multiple components to create unique, lightweight displays. Hybrids can be portable, modular, or custom depending on the size and the requirements. Sacagawea, Visionary Designs, Magellan, and Perfect 10 are all considered hybrids.

  2. What makes Visionary Designs different from your other hybrid systems, such as Perfect 10, Magellan, and Sacagawea?

    With Visionary Designs, anything is possible – portable, modular, custom, and custom-hybrid designs. Visionary Designs can be any size, any shape, any configuration. Think of the display kits as idea generators rather than final designs.

    Sacagawea blends upscale design with aggressive pricing that’s perfect for anyone looking for a lightweight hybrid display. Choose from three attractive design series, 65 compact and versatile displays, and terrific 10 ft. and 20 ft. configurations with multiple options.

    Anyone who loves curves, loves Magellan because the kits are all about curved metal and large tension fabric graphics. The most popular have been the Miracle and MOR, which (not surprisingly) are also the most affordable.

    Perfect 10 assembles without tools and comes in a mind-boggling assortment of color and shape options, all included in the standard price.There's no other display like Perfect 10, because not other system has the patented Perfect 10 S-Shape. 

  3. What are the key features of Visionary Designs?

    Features:

    • Sizes: Table Tops, Inlines, Islands, Counters, Pedestals, and Workstations
    • Kits: Over 300 standard kits. Unlimited design opportunities.
    • Aluminum Extrusions: Hundreds: Depends on the design and the function.
    • Graphics: From one to multiple tension fabric and direct print graphics. Velcro and silicone edge tension fabric connections.
    • Assembly: Hex key assembly. Individual numbered parts with detailed setup instructions.
    • Colors: Standard Sintra/Plex colors. (1) Standard extrusion color: Silver (clear satin anodized). Powder coat and anodizing options available for an additional cost.
    • Packaging: Roto-molded cases, tubs, and jigged wood crates.

    Bottom Line:  Extensive extrusion options, hex key assembly, small, medium, and large graphics (including SEG), unlimited designs, inlines, islands, and table tops. Visionary Designs includes the new SEGUE line of Silicone Edge Graphic displays, which maximizes graphics and minimizes visible extrusion.

  4. What is a tension fabric graphic?

    Tension fabric graphics attach to a frame so the fabric is taut edge-to-edge, creating “tension.” Typically, the graphic has Velcro hook sewn along the border, usually top and bottom, and attaches to Velcro loop on the frame. A silicone bead or welting can also be sewn to the edge of the tension fabric graphic. Those are referred to as Silicone Edge Graphics(SEG).

    What are the benefits of fabric graphics vs. traditional first surface graphics?

    • Flexibility. An array of fabric options and finishing exists. Fabric graphics can be adapted to just about any hardware
    • Storage and Shipping. Fabric is lighter than many other graphics. Fold your graphics neatly when in storage and take up much less space.
    • Care. Fabric graphics can be washed and steamed and are just as durable and long lasting as traditional graphics.
    • Lightweight. Larger graphics weigh less, perfect for draping or creating space definition.
    • Cost. More image bang for the buck!
    • Green. There are the obvious transportation and storage benefits. Even more exciting is the growing list of fabric options created from recycled materials.
    • No Glare. Fabric is the perfect choice for media walls or any backdrop that is being photographed or filmed.
    • Versatility. Fabric can be applied to most display and hardware options and is perfect for skinning or covering displays or objects. Custom covers can be created to drape over objects, wrap, or completely pillowcase them!
  5. I see the product name "SEGUE" in the Visionary Designs gallery? What is a SEGUE display?

    All SEGUE Hybrid Displays are designed with TSP aluminum extrusions which accept Silicone Edge Graphics. Silicone Edge Graphics (or SEG) is a high-resolution dye-sublimated fabric graphic finished with a thin silicone strip (or welt/gasket). The silicone strip is sewn directly to the edge of the graphic, and the strip is then inserted into an aluminum frame with a recessed groove.

    The goal of a SEGUE design, unlike other hybrid designs, is to minimize the appearance of aluminum extrusion. In most SEGUE designs, you see far less aluminum extrusion than if the display was built using traditional alumunum profiles. Good examples of SEGUE designs include:  

    VK-1309 | VK-1314 | VK-2306 | VK-2302 | VK-1118 |

    VK-1907 | VK-2311 | VK-2941 | VK-1951 |

     

     

  6. How do you clean dye sublimation fabric graphics?

    We recommend washing in your washing machine, cold setting, with a mild detergent and letting air dry.  Please DO NOT dry clean.

  7. What are the standard booth regulations for most North American trade shows?

    Trade show regulations vary slightly from venue to venue, but most North American halls adhere to these common regulations for inline and island booths. Exhibitors with international experience will recognize that North American rules are very different from those in Europe and Asia. For example:

    Standard/Linear Booth (10' depth)

    Any booth that shares a common back wall and abuts other exhibits on one or two sides.

    Maximum height is 8 ft. This 8 ft. height may be maintained on the sidewall of your booth up to a distance of 5 ft. from the front aisle. The remaining length of the sidewall may be no higher than 4 ft.

    In European shows, the display may extend 8 ft. to the aisle, which is uncommon in North American shows.

Product Warranty

Classic Exhibits Inc. warranties the performance of its portable, modular, and custom hybrid systems during normal use, excluding excessive wear and tear, as per the instructions. This covers the workmanship and locking systems as long as the exhibit has a useful life. All remaining parts are covered against defective materials or workmanship as long as the exhibit is in service. The warranty is transferable should the product be sold or assigned to another party.

The manufacturer cannot be held responsible for damages due to abuse, misuse, or shipping damages. This warranty does not cover laminate cracks and chips, wood crate and roto-molded case damage (excluding workmanship), aluminum extrusion scuffs, mars, and scratches from normal use, and graphics wear and tear or misuse. The manufacturer is not responsible for lost or missing parts once the owner has assembled, accepted, and used the product.

Should there be any questions regarding the warranty, please contact your local Classic Exhibits Distributor.

Lead Time

The lead time for the GKADL-2007 | Gravitee Inline is 15 - 20+ Business Days - Click for Details.

  • Suggested lead times may vary depending on current orders. Please check with Customer Service.
  • Production lead times are based on business days and DO NOT include any shipping days.
  • Production-ready artwork (when applicable) must accompany the order confirmation. Delays in uploading artwork may lead to expedited charges or shipping changes.
  • No order will be released to Production without a signed order confirmation.
  • Shipping is based on the availability of materials and graphics. Additional charges may apply if materials or graphics must be expedited.
  • Standard lead times do not apply to orders of multiple quantities.

Exhibit Weight

Exhibit Weight varies depending on the packaging and the shipping method. Variables include but are not limited to:
  • Dimensional Weight vs. Actual Weight: Dimensional weight is defined as crate or case size. On most air shipments, the dimensional weight exceeds the actual weight
  • Portable Cases vs. Wood Crates or Molded Tubs (where applicable): Exhibit designs that require one wood crate would require multiple portable cases. Selecting one vs. the other affects the total weight (dimensional or actual).
  • Freight Carrier: LTL carriers (Less than Truckload) quote freight based on space used. UPS, FedEx, and air freight carriers quote freight based on either the dimensional or the actual weight of the shipment.
  • Freight Service Level (number of days): Service levels range from Same Day Delivery to Two Week Delivery.
For more information about exhibit weights and freight options, please contact your local exhibit representative.

Electrical/Cord Management

Electrical, Cord, and Wire Management varies depending on the display and each exhibitor's requirements. When ordering your trade show display, consider the following electrical/wire management issues and discuss your options with an exhibit professional:
  • Inline vs. Island Displays
  • Lead Retrieval Devices
  • Computer and Monitor Cables
  • Demo Equipment
  • Overhead Lighting
  • Grommets and Grommet Placement in Counters
  • Overhead vs. Floor Power Supply
  • Flooring and Electrical Wiring
  • Options for Hiding Cords and Cables
  • Flat vs. Round Electrical Cords
  • Multi-Plug Outlets and Extension Cords
By reviewing your wiring options BEFORE you order your display, you'll save TIME and MONEY and ensure your exhibit exceeds your expectations and your installation is trouble-free.

Add designs and photos to your personal gallery simply by clicking on the +My Gallery links

Then email your "My Gallery" to colleagues, friends, or your favorite exhibit designer. There's no better way to begin designing a display that reflects your exhibit marketing goals.

Note: My Gallery uses a temporary browser cookie to store your gallery. We recommend that you send your gallery to your email address if you need to retain it for longer than 30 days.

  • Suggested lead times may vary depending on current orders. Please check with Customer Service.
  • Production lead times are based on business days and DO NOT include any shipping days.
  • Production-ready artwork (when applicable) must accompany the order confirmation. Delays in uploading artwork may lead to expedited charges or shipping changes.
  • No order will be released to Production without a signed order confirmation.
  • Shipping is based on the availability of materials and graphics. Additional charges may apply if materials or graphics must be expedited.
  • Standard lead times do not apply to orders of multiple quantities.
Exhibit Weight varies depending on the packaging and the shipping method. Variables include but are not limited to:
  • Dimensional Weight vs. Actual Weight: Dimensional weight is defined as crate or case size. On most air shipments, the dimensional weight exceeds the actual weight
  • Portable Cases vs. Wood Crates or Molded Tubs (where applicable): Exhibit designs that require one wood crate would require multiple portable cases. Selecting one vs. the other affects the total weight (dimensional or actual).
  • Freight Carrier: LTL carriers (Less than Truckload) quote freight based on space used. UPS, FedEx, and air freight carriers quote freight based on either the dimensional or the actual weight of the shipment.
  • Freight Service Level (number of days): Service levels range from Same Day Delivery to Two Week Delivery.
For more information about exhibit weights and freight options, please contact your local exhibit representative.
Electrical, Cord, and Wire Management varies depending on the display and each exhibitor's requirements. When ordering your trade show display, consider the following electrical/wire management issues and discuss your options with an exhibit professional:
  • Inline vs. Island Displays
  • Lead Retrieval Devices
  • Computer and Monitor Cables
  • Demo Equipment
  • Overhead Lighting
  • Grommets and Grommet Placement in Counters
  • Overhead vs. Floor Power Supply
  • Flooring and Electrical Wiring
  • Options for Hiding Cords and Cables
  • Flat vs. Round Electrical Cords
  • Multi-Plug Outlets and Extension Cords
By reviewing your wiring options BEFORE you order your display, you'll save TIME and MONEY and ensure your exhibit exceeds your expectations and your installation is trouble-free.